Force range: 200 N – Application of force: Rivet on bottom side – Contacting: Stranded wires (20cm) with PicoBlade connector – Housing: Screw-on metal housing
With this compact force sensor, the force is applied to a round-head rivet in the center. The sensor can be mounted very easily in a blind hole with a diameter of 12 mm (0.472 in) and a clearance. Flexible contacting and housing options make this sensor suitable for a wide variety of applications.
Product Name | KZ-011-0400-200N-E2-K1-G1 |
Force range | 200 N |
Application of force | Rivet on bottom side |
Electrical contacting | Stranded wires (20cm) with PicoBlade connector |
Housing | Screw-on metal housing |
Allowable overload | 300 N |
Sensitivity | 15 µV/V/N |
Supply voltage | 0 .... 15 V DC |
Supply current | 1.5 …. 2.5 mA at 10 V supply voltage |
Output signal span | 0 .... 3.0 mV/V |
Bridge resistance | 4.0 …. 6.0 kΩ |
Zero offset | -0.2 ... 0.2 mV/V |
Zero repeatability | ±0.02 %FS |
Sensitivity tolerance | ±10 % |
Sensitivity repeatability | ±0.3 % |
Linearity error | ±0.2 %FS |
Thermal shift for zero | ±0.02 %FS/°C |
Thermal shift for sensitivity | 0.02 …. 0.03 %/°C |
Substrate material | Stainless Steel 1.4542 / X5CrNiCuNb16-4 /17-4 PH® |
Modulus of elasticity | 197·10³ MPa (28.5·10⁻⁶ ksi) |
Substrate thickness | 1.6 mm |
Dimensions (LxWxH) | 22.5 x 22.5 x 3.8 mm |
Operating temperature range | -20 …. 125 °C |
Ambient humidity | 0 …. 95 %RH non-condensing |
Ingress protection | IP44 |
Force range: 200 N – Application of force: Rivet on bottom side – Contacting: Stranded wires (20cm) with PicoBlade connector – Housing: Screw-on metal housing
With this compact force sensor, the force is applied to a round-head rivet in the center. The sensor can be mounted very easily in a blind hole with a diameter of 12 mm (0.472 in) and a clearance. Flexible contacting and housing options make this sensor suitable for a wide variety of applications.
The centered force sensor Nesthorn KZ-011-0400 can be inserted into a blind hole with a diameter of 12 mm. The force application point is right in the middle. Due to the many available force ranges between 18 and 300 N, the possibility of applying force on both sides and the three contact variants, the sensor is suitable for a wide range of applications. It can be used, for example, in medical devices, measuring and testing devices or industrial plants. Versions with a laser-welded metal housing are also available for particularly easy installation and mechanical protection.
No account yet?
Create an Account
