Temperature
HYT Evaluation Box
Test board with standard modules HYT271 & HYT939
Box set of an Arduino based board with a digital (USB) and analog interface and the most common humidity modules from the HYT product family with a general use calibration.
1x Evaluation Board
1x HYT 271 module
1x HYT 939 module
1x USB cable
Product Name | HYT Evaluation Box |
Operating humidity range | 0 to 100 % RH (modules) < 95 % non condensing (board) |
Operating temperature range | -20 °C to 120 °C (modules); -20 °C to +50 °C (board) |
Accuracy humidity | ±1.8% RH (0-90% RH), ±3%(>90%RH) at 0-50°C |
Accuracy temperature | ±0.2 °C@0-50°C |
Digital interface | Board to PC: USB Board to Sensor: I²C |
Operating voltage | 5 V (USB); 4 to 15 V DC |
Current consumption | 50 to 300 mA |
Dimensions | 84 x 29 mm (LxW, board) |
Measured medium | Air/Gas |
Description
-
Benefits and Characteristics of the HYT Evaluation Box
The purpose of this evaluation board is to facilitate the evaluation of HYT sensor modules for humidity and temperature under application-relevant conditions. The evaluation board enables connection of a HYT module to a PC via USB. If required, it converts its digital I2C output to analog signals.
-
Option: High-end humidity calibration HYT modules
With the development of a high end humidity calibration and measurement set up, the HYT sensor family boasts the accuracy of up to +/- 1.4 % RH and sets new standards for moisture measurement with low hysteresis and easy plug-and-play interchangeability.
Our three HYT models can be ordered with a tailored calibration, which allows an accuracy of higher than +/- 1.4 % RH when used in combination with a limited range of 0-50 % RH. For dew point applications measuring in the range of 0-5 % RH, you can even reach an accuracy of < +/- 0.5 % RH.