Temperature
Capacitive Humidity Sensor P14 2FW Thermo (150pF +/-50pF)
Heatable Humidity Sensor with integrated Pt 100 heating element, -50+C to +150°C, 5.0 x 3.8 x 0.8mm
Capacitive Humidity Sensor P14 2FW Thermo with integrated Pt-heater element and Au-coated Ni flat wires
Product Name | P14 2FW Thermo (P0K1) |
Capacitance | 150pF +/-50pF (at +23 °C and 30 % RH) |
Operating humidity range | 0 % RH to 100 % RH |
Operating temperature range | -50 °C to +150 °C |
Dimensions | 5.0 x 3.8 x 0.8 mm |
Connection type | Au coated Ni flat wire |
Wire dimensions | 0.2 x 0.25 mm, 10 mm long |
Response time | < 5 s |
Measured medium | Air/Gas |
Description
-
P14 2FW Thermo - Optimal for dew point applications
The P14 2FW Thermo was designed especially for dew point applications and humidity generators. The favorable one-chip solution consists of a capacitive humidity sensor, based on the standard P14 sensor, together with a heating element, which, at the same time, works as a valid Pt100 sensor. The sensor achieves outstanding measurement accuracy due to the optimal thermal coupling which enables a fast recovery time. Due to heating from the Pt100, humidity is quickly released and enables fast re-measurements after condensation. Furthermore, the Pt100 sensor heats out gases or vapors from the polymer, which might cause a drift of the humidity signal. The P14 2FW Thermo humidity sensor is capable of measuring 0 % RH to 100 % RH (maximal dew point +85 °C) with a capacitance of 150 pF ±50 pF (at 30 % RH and +23 °C) and operates within a temperature range of -50 °C to +150 °C.